cfi notebook navigation and flight planning

The file resolution is 300 dots per inch and the data is 8-bit color. Still looking for something? For times under 3 minutes, the small arrow may need to be utilized, Navigation logs, or NAVLOGs, is the printed, either physically or digitally, plan, This plan accounts for the environment's effects on the aircraft, as well as aircraft anomolies like deviation, NAVLOGs come in many forms and there is no perfect form; its about personal preference. This means that your aircraft may be eligible for RNP 1 operations, but you may not fly an RF turn unless RF turns are also specifically listed as a feature of your avionics suite, RNP 2 will apply to both domestic and oceanic/remote operations with a lateral accuracy value of 2, RNP 4 will apply to oceanic and remote operations only with a lateral accuracy value of 4, RNP 4 eligibility will automatically confer RNP 10 eligibility, The RNP 10 NavSpec applies to certain oceanic and remote operations with a lateral accuracy of 10. Continue searching. | Privacy Policy | Terms of Service | Sitemap | Patreon | Contact, Aeronautical Information Manual (1-2-2) Required Navigation Performance (RNP), Aeronautical Information Manual (5-1-16) RNAV and RNP Operations, Aeronautical Information Manual (5-5-16) RNAV and RNP Operations, Federal Aviation Administration - Pilot/Controller Glossary, Required Navigation Performance, or RNP, is RNAV with the added requirement for onboard performance monitoring and alerting (OBPMA), RNP standards are required for operation within a certain airspace, A critical component of RNP is the ability of the aircraft navigation system to monitor its achieved navigation performance, and to identify for the pilot whether the operational requirement is, or is not, being met during an operation, RNP capability of the aircraft is a major component in determining the separation criteria to ensure that the overall containment of the operation is met, OBPMA capability therefore allows a lessened reliance on air traffic control intervention and/or procedural separation to achieve the overall safety of the operation, The RNP capability of an aircraft will vary depending upon the aircraft equipment and the navigation infrastructure [, For example, an aircraft may be eligible for RNP 1, but may not be capable of RNP 1 operations due to limited NAVAID coverage or avionics failure. CFI Notebook Flight Training Aircraft Operations Aerodynamics & Performance Maneuvers & Procedures Operation of Aircraft Systems Weather & Atmosphere National Airspace System Avionics & Instruments Publications & References Aeromedical & Human Factors Navigation & Flight Planning Rules & Regulations Flight Hazards & Safety Air Traffic Control Routine checks of position against VOR or DME information, for example, could help detect a compromised GPS signal. This notebook compiles the black and white text of manuals, regulations, and guides, adding the context . RF turn capability is optional in RNP APCH eligibility. As a safeguard, the FAA requires that aircraft navigation databases hold only those procedures that the aircraft maintains eligibility for. Federal Aviation Administration - Pilot/Controller Glossary, FAR 91.103 that "Each pilot in command shall, before beginning a flight, become familiar with all available information concerning that flight" which includes, If you don't own an airplane, you probably rent your favorite aircraft at the same FBO each time you fly however, for many, that may not be a possibility, Variations in airplanes which you are licensed and probably signed off to rent by your local FBO must be considered, While normal procedures can generally be done at the pilot's pace, emergency procedures cannot, making their understanding crucial, Aircraft perform differently based on the environmentals and type of operation expected, Be cognizant of "what is different today" and brief to it up front, so factors like density altitude and weight and balance are taken into consideration, Review and print, or tab a copy of the arrival and departure airport, as required, Be wary of "expectation bias;" listen to what a controller actually says, not what you expect, Enroute sector boundaries can be found on enroute charts allowing you to anticipate where about a switch will occur, and to what frequency, Don't ignore what you are flying over as water conditions/temperatures and terrain may impact what you bring and how you may react to an emergency, Pilots must be familiar with what equipment is installed in the airplane, Just as important, pilots must be familiar with where that equipment is installed, The most obvious example is the instrument panel, where equipment like transponders maybe in a new location, even across the same brand of airplane but a different model, Less obvious examples are safety equipment. For some navigation systems and operations, manual selection of scaling will be necessary, Pilots flying FMS equipped aircraft with barometric vertical navigation (Baro-VNAV) may descend when the aircraft is established on-course following FMS leg transition to the next segment. PDF Flight Instructor PTS with changes 1 through 6 The system must be able to retrieve the procedure by name from the aircraft navigation database, not just as a manually entered series of waypoints, Whenever possible, RNAV routes (Q- or T-route) should be extracted from the database in their entirety, rather than loading RNAV route waypoints from the database into the flight plan individually. Copyright 2023 CFI Notebook, All rights reserved. Trust our experience to help you soar. Flight Deck Management Lesson Plan - CFI Notebook Print outs of the local airport information from the Chart Supplement U.S. To determine that the applicant exhibits satisfactory knowledge, risk management, and skills associated with pilotage and dead reckoning, References: 14 CFR part 61; FAA-H-8083-2, FAA-H-8083-25; Navigation Charts, To determine that the applicant exhibits satisfactory knowledge, risk management, and skills associated with cross-country flights and VFR flight planning, References: 14 CFR part 91; FAA-H-8083-2, FAA-H-8083-25; Navigation Charts; Chart Supplements; AIM; NOTAMs, Planning is based on what we believe will occur, It may be incorrect and calculations/adjustments may need to be made in flight, but having a point from which to depart leads to educated decisions, The military calls this mission cross-check, When dead reckoning, you've done the math to determine timing, and so if you arrive at a checkpoint according to timing and direction but you don't see it, turn to your next heading and orient yourself, Information to aircraft performance at various altitudes can be found in Chapter 5 of the Pilot Information Manual, Navigation should always be done from the chart to the landmarks, This means look at your chart first and then at the ground for your landmark, If done the other way around you could find yourself staring at your map looking for a landmark that may not be charted, There is no correct cruise altitude, its a balance of terrain and obstacles, glide distances, winds, required VFR cruising altitudes and flight levels, and smoothness of air, Remember that documents may not reflect reality and when it comes to services available at an airport, they may not be available due to supplies or even destructive weather, It is advised that you call FBOs ahead of departures to ensure required services are available, Don't forget about what you want to do after you reach your destination, Chose an Fixed-Based Operator (FBO) ahead of landing and give them a call before you depart to ensure the desired services will be available, where you must go to receive them (i.e., fuel farms may not be at the FBO ramp), and any special parking instructions, When traveling cross-country, it is recommended to carry extra closes/toiletries (bingo bag) to mitigate comfort-based delays when making, Pilots should consider the implications of planning or filing/requesting direct legs. An example of a generic NAVLOG is provided below: Fill out the departure and arrival airport information including frequencies, traffic altitudes, and heights above ground, Fill in information concerning flight service or any item you will want to reference in regards to that airport, If you want, draw an airport diagram in the box but still carry a larger printed diagram for easier use and more detail, Determine a MSL cruise altitude based on weather and direction of flight, Calculate pressure altitude for your airport (important for performance calculations), Determine the temperature (important for performance calculations), Calculate density altitude (important for performance calculations), Determine a horsepower setting and the accompanying RPM settings, KTAS and Gallons per Hour, Used to plot any changes to a heading for the entire route to estimate times, distances and fuel used, Fuel Planning calculated with flight computer (arrow on GPH, read under time), List all checkpoints and associated distances, Write in any frequencies or IDs for route navigation, GS (first or second line only): copy from preflight log, In flight you will be filling in the other boxes as the flight progresses, Weight and balance as calculated normally, Fill out any weather information or notes you may have, Fill out the flight plan for flight service, All information is from the front of the navigation log, Filed before flight with the FSS so they can keep a track of you. Still looking for something? RNP APCH has a lateral accuracy value of 1 in the terminal and missed approach segments and essentially scales to RNP 0.3 (or 40 meters with SBAS) in the final approach. RNP AR DP is intended to provide specific benefits at specific locations. Pilots transitioning to VOR navigation in response to GPS anomalies should refer to the Chart Supplement U.S. to identify airports with available conventional approaches associated with the VOR Minimum Operational Network (MON) program. Private Pilot Navigation Lesson Plans - CFI Notebook If you need to travel 10 NM, and you have a ground speed of 100 knots, how long will it take? Each procedure is designated for use with a specific electronic navigational aid, such as ILS, VOR, NDB, RNAV, etc. Cockpit Management - CFI Notebook In the future, there will be an increased dependence on the use of RNAV in lieu of routes defined by ground-based navigation aids, RNAV routes and terminal procedures, including departure procedures (DPs) and standard terminal arrivals (STARs), are designed with RNAV systems in mind. Of greater and growing concern is the intentional and unauthorized interference of GPS signals by persons using "jammers" or "spoofers" to disrupt air navigation by interfering with the reception of valid satellite signals, The U.S. government regularly conducts GPS tests, training activities, and exercises that interfere with GPS signals. Navigation Systems and Radar Services Lesson Plan Introduction: To determine that the applicant exhibits satisfactory knowledge, risk management, and skills associated with a forward-slip to a landing References: FAA-H-8083-2, FAA-H-8083-3; POH/AFM; AIM Attention: Research a case study Fly CFI Sacramento. ), Similar to RNP AR approaches, RNP AR departure procedures have stringent equipage and pilot training standards and require special FAA authorization to fly. | Privacy Policy | Terms of Service | Sitemap | Patreon | Contact, U.S. Terminal Procedures Publication (TPP), Instrument Approach Procedure (IAP) Charts, Instrument Departure Procedure (DP) Charts, Gulf of Mexico and Caribbean Planning Chart, The Digital Aeronautical Information CD (DAICD). Additional data elements will be added in subsequent releases to include: departure procedures, standard terminal procedures. RNP AR DP capability requires specific aircraft performance, design, operational processes, training, and specific procedure design criteria to achieve the required target level of safety. [Figure 1-4], Very high frequency omni-directional ranges (VORs) are the principal NAVAIDs that support the Victor and Jet airways, Many other navigation tools are also available to the pilot, For example, non-directional beacons (NDBs) can broadcast signals accurate enough to provide stand-alone approaches, and DME allows the pilot to pinpoint a reporting point on the airway, Though primarily navigation tools, these NAVAIDs can also transmit voice broadcasts, Tactical air navigation (TACAN) channels are represented as the two- or three-digit numbers following the three-letter identifier in the NAVAID boxes, The AeroNav Products terminal procedures provide a frequency-pairing table for the TACAN-only sites. In such airspace, the RNAV 10 NavSpec will be applied, so any aircraft eligible for RNP 10 will be deemed eligible for RNAV 10 operations. If an alternate is required, the alternate airport must have an instrument approach while meeting certain criteria: 800' ceiling, 2 miles visibility, if non-precision approach, 600' ceiling, 2 miles visibility, if precision approach, If no approach exists for the alternate runway, descent from cruising altitude must be possible under Visual Flight Rules, Note that minimums published for approaches may differ, Navigation can be accomplished in several ways, Two examples include pilotage and dead reckoning which, although different, are not mutually exclusive, Dead recokoning is navigation by planning, When track = course you are flying exactly where you intend, Various tools are necessary to complete a flight plan, Generally the most direct route is preferred but several considerations may require some deviation, Checkpoints allow you to follow the progress of your flight against your planning calculations, Landmarks can be checkpoints but may also inform a pilot where they are in relation to checkpoints. For example, while operating on a Q-Route (RNAV 2), the aircraft is considered to be established on-course when it is within 2 nm of the course centerline, Pilots must be aware of how their navigation system operates, along with any AFM limitations, and confirm that the aircraft's lateral deviation display (or map display if being used as an allowed alternate means) is suitable for the accuracy of the segment being flown. RF turn capability is optional in RNP 0.3 eligibility. ", Checkpoints should be appropriately 10 NM apart, They may be points off the route which you can identify when abeam, Use of tools such as satellite maps (Google, Bing, etc.) Copyright 2023 CFI Notebook, All rights reserved. cfi. This is known as turn anticipation, Fly-over waypoints are used when the aircraft must fly over the point prior to starting a turn, A leg type describes the desired path proceeding, following, or between waypoints on an RNAV procedure, Leg types are identified by a two-letter code that describes the path (e.g., heading, course, track, etc.) Continue searching. Altitude selection depends on a variety of factors which include: Although seemingly obvious, controlled flight into terrain is still a leading caues of aviation accidents, Terrain and obstacles along the route of flight must be avoided either laterally or vertically, Additionally, a brief study of the map should highlight hazards should the pilot chose to alter the route, in flight, Numerous skeletal structures such as radio and television antenna towers exceed 1,000' or 2,000' AGL, Most skeletal structures are supported by guy wires which are very difficult to see in good weather and can be invisible at dusk or during periods of reduced visibility, These wires can extend about 1,500 feet horizontally from a structure; therefore, all skeletal structures should be avoided horizontally by at least 2,000 feet, Additionally, new towers may not be on your current chart because the information was not received prior to the printing of the chart. CFI Notebook: "Higher" Education Typically, an aircraft eligible for A-RNP will also be eligible for operations comprising: RNP APCH, RNP/RNAV 1, RNP/RNAV 2, RNP 4, and RNP/RNAV 10. The CFI, or Flight Instructor Notebook, is an instructor's guide to navigating the sea of resources to provide useful guidance for their students and themselves. The aeronautical information includes visual and radio aids to navigation, airports, controlled airspace, special-use airspace, obstructions, and related data Scale 1 inch = 6.86nm/1:500,000 Revised every 56 days, except most Alaskan charts are revised annually Charts can be purchased through Amazon Amazon, Sectional Aeronautical Chart Flight Planning - CFI Notebook This is especially true when operating below 500' AGL and morseo below 200' AGL, Also, many of these structures do not meet charting requirements or may not yet be charted because of the charting cycle, Some structures do not require obstruction marking and/or lighting and some may not be marked and lighted even though the FAA recommended it, Notice to Air Missions (NOTAMs) will typically be published for any known unlit structures, but pilot vigilance is imperative in case the FAA has not yet been notified of outages, The glide distance of the airplane is based on the glide ratio, a performance number to provide an idea of the options available in an engine out, More than airports, suitable roads and fields options for emergency landings increases with increased altitude, Additionally, regulatory requirements, such as those found in FAR 91.205, specify supplemental survival equipment depending on glide-distance from shore if the flight is conducted for hire, Even further, FAR 91.509 further specifies supplemental survival equipment based on distance from shore, Winds are an important planning consideration both during terminal (surface winds) and cruise (winds aloft) environment, Surface winds are most commonly used for determining an optimal runway in the terminal area, Similarly, surface winds provide insight into optimal landing surfaces in an emergency along a route of flight, Wind direction and intensity at various cruise altitudes are an important consideration to determine cruise performance, Winds aloft are the most direct means to plan for winds at cruise altitudes along the route of flight, Headwinds increase flight time and therefore fuel burn, reducing range, while tailwinds do just the opposite, Further, headwinds require for power (increased fuel burn) and tailwinds decrease power requirements (decreased fuel burn), Except while holding in a holding pattern of 2 minutes or less (see. The two terms, often used interchangeably, in fact mean different things: Courses are the direction which the aircraft is actually traveling (impacted by winds), Headings are the directions which the aircraft faces (where it is pointed). Fundamentals of Instructing Task A: Human Behavior and Effective Communication Task B: The Learning Process Task C: The Teaching Process Task D: Assessment and Critique Task E: Instructor Responsibilities and Professionalism Task F: Techniques of Flight Instruction Task G: Risk Management II. Operators of aircraft not having specific RNP eligibility statements in the AFM or avionics documents may be issued operational approval including special conditions and limitations for specific RNP eligibilities, Some airborne systems use Estimated Position Uncertainty (EPU) as a measure of the current estimated navigational performance. Transmission and utility lines often span approaches to runways, natural flyways, such as lakes, rivers, gorges, and canyons, and cross other landmarks pilots frequently follow, such as highway, railroad tracks, etc. The 13 Colonies (an odd number) were on the east coast of the U.S. NEODD SWEVEN: North East Odd, South West Even, Once a route has been chosen, you need to calculate headings/courses to be flown. Erau Flight Plan - CFI Notebook: "Higher" Education Diversions - CFI Notebook Task B. If you do not close the flight plan 30 minutes after the proposed arrival time, SAR (search and rescue) procedures begin, Fill out airspeeds, runway lengths, and altitudes, After you've completed your flight log, consider the creation of an inflight guide to keep on your kneeboard during flight, This inflight guide is not intended to create an extra step in flight planning but instead to make your life easier when you're flying. It is this concept that requires each NavSpec eligibility to be listed separately in the avionics documents or AFM. Magnetic heading will usually require a correction based on the variation or: The angular difference between true north and magnetic north from any given position on the earth's surface (represented by isogonic lines), Isogonic lines are points of equal variation, represented in degrees east or west, Deviations is usually pulled off a sectional chart however, other sources such as, The memory aide "east is least (minus), west is best (plus)" is often used to remember how to apply east and west variations, Magnetic Course (MC) = True Course (TC) - East Variation, Magnetic Course (MC) = True Course (TC) + West Variation, All aircraft will have a deviation factor that must be applied, Deviation is read off the compass card in the aircraft, and must be added or subtracted to the magnetic course as appropriate, Determining winds at altitude help guide your true heading, Since winds aloft are expressed in "true," you will calculate the wind correction angle off true course, Deviation is found on a placard with your magnetic compass, Variation is necessary for converting true headings to magnetic, Magnetic variation depends on your location on the earth, as labeled by isogonic lines, Compass heading is determined by applying the deviation correction to the magnetic heading, From Sea Level to 5,500' we calculate 9 minutes, 2.0 Gal, 13 NM, Assuming 1,000' for the departure altitude we calculate: 1 minute, 0.4 Gal, 2 NM, Subtract the difference: (9-1)=8 Min, (2.0-0.4)=1.6 Gal, (13-2)=11 NM, Pay attention to the notes at the bottom of the chart, especially to add 1.1 Gal for taxi and takeoff, Utilizing a simple formula (Distance = Time x Ground Speed may be utilized, Therefore, if you have any two, you can calculate the other.

Mclaren Bay Region Employees, Is Din Djarin Mandalore The Redeemer, Articles C